So what has changed in the past 20 years? Take for example the network equipment that was manufactured in 1997, how did you configure that equipment? I would imagine it involved a serial port, HyperTerminal and trusty command line. Was API even a thing back in 1997, was it common to have an API interface in network equipment like today? Why do we even need an API on the equipment in the first place? What changed?
You have the FMC installed and connect to FTD device with configuration deployed but for what ever reason there is a problem and you need to enter the CLI on the Firepower device to troubleshoot the equipment and although you can’t configure anything you can do show and debug commands to troubleshoot via the CLI. Continue reading “Enter Cisco Firepower CLI (Read-Only)”
We could use HSRP or VRRP to have a redundant default gateway for our PC/server networks. Although this works well we now have hardware powered-on and just sitting around waiting for its counterpart to fail, we are not actively using it. We could split up networks or use multiple default gateways within the same network but who does that? Well if your router or layer three switch happens to have that Cisco logo on it and a software release of at least 12.2(14)S, please welcome and “slow clap” the Gateway Load Balancing protocol, who has been around since 2002! Continue reading “GLBP Load Balancing”
This is short and hopefully helpful post on how to manually update Cisco Firepower Devices. I have run into this problem a couple of times which is pushing this update with the FMC sometimes just fails and it never really seems to download the update to the Firepower sensor. Continue reading “Update Firepower Devices – Manually”
Cisco is actively pushing their Firepower Threat Defense software with the new Firepower 2100 units on their way this summer in effort to eventually replace the ASA5525-X, ASA5545-X and ASA5555-X platforms. When using FTD you must also have the Firepower Management Center (FMC) available to manage and configure these devices. This gets difficult especially if you want to test things out because not everyone has Cisco Firepower lying around unused. How are you supposed to test and learn the depths of this product? (Hint: Cisco VIRL) Continue reading “Cisco FTDv in Cisco VIRL”