It’s been fun four months of 2018 so far and I’m back to talk about Wireless VLANs. With 802.11ax around the corner (2019) I think we all can agree that “weird” connections although less likely have interference isn’t as mobile as a wireless LAN. Also, with 802.11ax the maximum theoretical throughput is 10Gbps! We’re going to need some serious backend infrastructure available to be able to support that type of bandwidth. So, let’s look at configuring a wireless VLANs for our mobile users!
Let’s start out 2018 with private VLANs, with PVLANs the network gets a little more privacy added to it. When we have privacy on the network we can seclude certain parts of it. Essentially, “you can go about your business – move along, move along”. Private VLANs allow us to segment networks within a single VLAN. So in this post we’ll go over the types of PVLANs as well as setup a network topology with private VLANs, Let’s get started! Continue reading “Private VLANs”
VACLs are another good layer of security to help control who can talk to who, much like access control lists that are in firewalls and routers, however the difference is VACLs operate at layer two of the OSI model. There could be situations where you have multiple hosts on the same LAN and want to block traffic from reaching certain hosts within that same network, how would you go about blocking that type of traffic without using a router or firewall? (Hint: Create a VACL)
So what has changed in the past 20 years? Take for example the network equipment that was manufactured in 1997, how did you configure that equipment? I would imagine it involved a serial port, HyperTerminal and trusty command line. Was API even a thing back in 1997, was it common to have an API interface in network equipment like today? Why do we even need an API on the equipment in the first place? What changed?
You have the FMC installed and connect to FTD device with configuration deployed but for what ever reason there is a problem and you need to enter the CLI on the Firepower device to troubleshoot the equipment and although you can’t configure anything you can do show and debug commands to troubleshoot via the CLI. Continue reading “Enter Cisco Firepower CLI (Read-Only)”